Motor oil change sticker
Informative Motor oil change-interval sticker
Number of pieces in package: 50
Sticker dimensions: 90mm x 50mm
Self-adhesive paper sticker
For information on how to make sticker waterproof and long-term durable please read the instructions below.
96 Item Items
Warning: Last items in stock!
Instructions for use:
To make the sticker waterproof and long-term durable it must be covered by protective tape. Protective tape for the service sticker is available to buy here.
Please follow the steps below on how to cover the sticker with protective tape. It is important to follow the procedure. Protective tape protects the surface and information written on the service sticker by pen.
Place the service sticker only to metal parts of the car. For example, in engine space, hood or to lower door pillar. You can find examples of placement of the stickers below.
Service sticker properties:
Service sticker covered by protective tape and placed to metal parts of car has these properties:
- Operating temperature -40°C to +80°C:
- Comply with standard IEC 60068-2-1: Cold -40°C/16h
- Comply with standard IEC 60068-2-2: Dry heat +80°C/16h
- Resistant to humidity and water
- Resistant to mechanical damage
Service sticker covered with protective tape and placed to the metal surface is suitable for long-term intervals.
Instructions how to cover stickers by protective tape:
1. Stick the end of the protective tape to the edge of a straight table. Unwind 20 cm of tape. Place the service sticker with filled information down below the protective tape.
2. Use any card from your wallet and press firmly on the tape at the beginning of the service sticker.
3. Swipe the tape with the card. Start from the beginning of the label and continue to the end in one stroke. It is necessary to use the card. Otherwise, air bubbles can appear.
4. & 5. Lift the protective tape with a service sticker. Now service sticker has a protective layer.
6. Cut the excessive protective tape with scissors.
Examples of application:
Removing the sticker from the metal parts of car:
Remove protective tape first.
Dampen the sticker with hot water, let it soak for a while, later the paper part can be easily removed.
The last part of the sticker is glue. Use a brake cleaner to remove any remaining glue residue.
You can also place a new sticker on the previous sticker. Then you do not have to remove the old one.
Keywords: motorolie skift klistermarke, motorolieskift, mootoriõli vahetamise kleebis, mootoriõli vahetus, moottorin öljynvaihtotarra, moottorin öljynvaihto, autocollant de changement d'huile moteur, changement d'huile moteur, Motorölwechselaufkleber, Motorölwechsel, motor oil change sticker, engine oil change sticker, motor oil change, engine oil change, adesivo cambio olio motore, cambio olio motore, motoreļļas maiņas uzlīme, motoreļļas maiņa, variklio alyvos keitimo lipdukas, variklio alyvos keitimas, Motor Ueleg Änneren Sticker, Motor Ueleg änneren, motorolie verversen sticker, motorolie verversen, adesivo de troca de óleo de motor, mudança de óleo do motor, nalepka za zamenjavo motornega olja, menjava motornega olja,pegatina de cambio de aceite de motor, cambio de aceite de motor.